|
 目前位置 : PCI首頁 > 產品&解決方案 > 企業型用戶 > 工業型網路產品 > ISM-2007F |
| |
| ISM-2007F |
 |
| Industrial Managed Switch with 7-port 10/100Mbps + 2-port 100Mbps SFP LC-type slots |
| |
|
| |
| |
Hardware
- Complies with IEEE 802.3 (10Base-T) & 802.3u (100Base-TX/FX) standards
- 7-port 10/100Mbps Auto-Negotiation Ethernet ports
- 2-port 100Base-FX with SFP LC-type slots
- 1-port RS-232 console port with RJ45 connector
- Auto-MDI/MDIX (crossover) on all 10/100Base-TX ports
- Integrated address Look-Up Engine, supports automatic learning of up to 2K MAC addresses
- IEEE802.3x flow control for full-duplex, and back pressure for half-duplex
- Wire speed reception and transmission
- Non-blocking, Store-and-Forward switching
- Vibration/Shock operational
- DIP switch to enable or disable alarm functions
- Rugged, hardened IP30 case
- Wall mount or Din-Rail mountable installation
- LED indicators for link actives status
Software
- Supports SNMP (Simple Network Management Protocol) v1/v2 monitoring and RMON
- SNMP management application software (HP Open View and IBM/Tivoli NetView capable)
- Supports IEEE802.1Q tag-based VLAN, port-based VLAN, up to 64 active Tag-based VLANs
- Supports IEEE802.1p QoS function, tag base, DSCP priority
- Supports IEEE802.3ad Link Aggregation, up to 9 ports and 4 groups port aggregation
- Supports IGMP Snooping for multicast filtering
- Loss of link management on fiber ports
- Xpress Ring (redundant ring) with less than 50ms recovery time
- Power-input polarity protection function
- Under-power & over-power detection function
- Dual redundant DC power inputs with terminal block
- Http/Web browser user interface, CLI and Menu driven user interfaces via both console and telnet
- Supports web-based management interface
- Supports console CLI(Command Line Interface)
- Supports to upgrade firmware
Applications
- Industrial/Factory/Laboratory automation SCADA systems
- Self-service banking systems
- Factory robots and HVAC control systems
- Wafer fabrication systems
- Point of Sale (POS) systems
- Security cameras or other remote distributed serial devices
- Any application where ruggedness, durability and shock/vibration-proof qualities are required
|
|
 |
| Model |
ISM-2007F |
| Access Method |
10/100Mbps (CSMA/CD) |
| Standard Complies |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/FX
IEEE802.3ad Link Aggregation
IEEE802.3x flow control
IEEE802.1d Spanning Tree
IEEE802.1p Priority Queues
IEEE 802.1Q VLAN Tagging |
| Port Configuration |
-7 ports RJ-45 connectors for 10/100BASE-TX
-2 ports SFP LC-type connectors for 100BASE-FX
-1 port RJ45 connector for RS-232 console
-Auto MDI/MDI-X
-Auto-Negotiation |
| Throughputs |
10Mbps port:14,880pps
100Mbps port:148,800pps |
| Data Transfer mode |
Non-blocking, store-and-forward |
| Flow Control |
Full Duplex: IEEE802.3x
Half Duplex: Back Pressure |
| Management |
SNMP v1 and v2
RMON
Web-based management
Console CLI(Command Line Interface) |
| Port Trunking |
IEEE802.3ad Link Aggregation
Up to 9 ports and 4 groups port aggregation |
| Packet Buffer |
1MB |
| MAC Address |
2000 entries |
| Internal Bus Speed |
1.8Gbps |
| Power Supply |
9~48V DC |
| Power Consumption |
10.08W (Max.) |
| Operating temperature |
-10°C to 70°C |
| Storage temperature |
-20°C to 80°C |
| Operating humidity |
10% to 95% relative humidity, non-condensing |
| Storage humidity |
5% to 95% relative humidity, non-condensing |
| DIN-Rail mounting |
Supported 35mm |
| Redundant power input |
Supported |
| Dimension (W x D x H) |
50mm x 120mm x 162mm |
| Weight |
780g |
| Certification |
FCC Class A, CE, VCCI |
| Enclosure |
Metal case |
| Ingress Protection |
IP30 |
| LED Indicators |
Power, Link/Act. |
| 100Base-FX module |
MGBIC-FX-P: 100Base-FX SFP module |
|
|
|