|
 |
Provides Gigabit connectivity on all ports |
| |
All of the 8 ports on the product fully support 1000Mbps connectivity. In a business environment that requires advanced information processing capability, the SWP-0208G serves as an ideal switch solution for network backbones that handle large volumes of data and multimedia data. |
| |
 |
8-port 1000BASE-TGigabit compatible 2 port combo-ports |
| |
2 combo-ports providing 1000BASE-T and MiniGBIC in addition to the web smart switch compatible 81000BASE-T ports. This switch is best suited for use on backbones for networks handling big amounts of data and multimedia in the business environments where high-level information processing capabilities are needed ,and can support Broadcast Storm suppression. |
| |
 |
All ports support Auto MDI/MDI-X |
| |
All ports support Auto MDI/MDIX, a built-in function that automatically recognizes the type (straight/crossover) of the attached cable. This feature effectively removes all wiring troubles caused by a cable type mismatch.
(either a crossover cable or a straight cable) |
| |
 |
VLAN and QoS Improve Network Availability |
| |
The port-based VLAN feature of the product enables the construction of a logical network group that consists of multiple PC clients. The switch is also capable of managing communication bandwidth as it supports IEEE802.1p QoS, an advanced technology that assigns bandwidth to each traffic stream according to its designated priority level.
* SWP-0208G support IEEE802.1q 4096 Tag-Base VLAN. |
| |
 |
Support Bandwidth Control "Rate Limiting" |
| |
Featuring the rate limiting of bandwidth flow management. This specific function can be set up in Ingress or Egress per Gigabit 1000Mbps port . And egress rate limit 1000Mbps with 1Mbps |
| |
 |
SupportsPort Trunking |
| |
Its built-in Trunking function enhances switch-to-switch bandwidth by bundling multiple physical ports into one logical link. The bandwidth between any two switches supporting Trunk (or Trunking) can be improved significantly, and this scheme requires absolutely no additional high-speed interface.
* SWP-0208G Maximum : uses 4 ports with 4 trunking group, maximum bandwidth at full duplex = 8 Gbps |
| |
 |
SupportsPort Mirroring |
| |
The product supports port mirroring, a function that copies packets sent or received on a specific port to another port. A monitoring device such as Sniffer or RMON probe can be attached to a port to analyze the details of the packets that pass through the source port. |
| |
 |
Higher Network Efficiency Achieved via Flow Control |
| |
Supports Flow Control (Full Duplex: IEEE 802.3x, Half Duplex: Back Pressure), which prevents packet losses caused by mismatches between the sending and the receiving speeds (bandwidth). The switch utilizes this technology to allow the establishment of a highly efficient and reliable networking environment. |
| |
 |
Configuration via a WEB browser |
| |
The SWP-0208G is easily configurable through a web browser. Using local server function can setup each port through internet. |